Compatible and tearing properties of poly(lactic acid)/poly(ethylene glutaric‐co‐terephthalate) copolyester blends

Fourier transform infrared and nuclear magnetic resonance results suggest that the carboxylic acid groups of poly(lactic acid) (PLA) molecules react with the hydroxyl groups of FePol (FP) molecules during the melt‐blending of PLA_xFP_y specimens. Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) experiments of PLA and PLA/FP specimens suggest that only small amounts of poor PLA and/or FP crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature, and onset re‐crystallization temperature values of PLA/FP specimens reduce gradually as their FP contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA reduce to a minimum value as the FP contents of PLA_xFP_y specimens reach 6 wt %. Further DMA and morphological analysis of PLA/FP specimens reveal that FP molecules are compatible with PLA molecules at FP contents equal to or less than 6 wt %, as no distinguished phase‐separated FP droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/FP specimens, respectively. In contrast to PLA, the FP specimen exhibits highly deformable and tearing properties. After blending proper amounts of FP in PLA, the inherent brittle deformation and poor tearing behavior of PLA were successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tearing properties of PLA/FP specimens are proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 913–920, 2010     

Structure determination of selaginellins G and H from Selaginella pulvinata by NMR spectroscopy

Selaginellins G ( 1 ) and H ( 2 ), two new selaginellin derivatives, were isolated from the whole plant of Selaginella pulvinata. Their structures were elucidated, and complete assignments of the ¹H and ¹³C NMR spectroscopic data were achieved by 1D and 2D NMR experiments (HSQC, HMBC, COSY and ROESY). Compound 1 displayed good antifungal activity against Candida albicans with an IC₅₀ value of 5.3 µg/ml. Copyright © 2010 John Wiley & Sons, Ltd.     

Bäcklund transformations and abundant exact explicit solutions of the Sharma-Tasso-Olver equation

By using an extension of the homogeneous balance method and Maple, the Bäcklund transformations for the Sharma-Tasso-Olver equation are derived. The connections between the Sharma-Tasso-Olver equation and some linear partial differential equations are found. With the aid of the transformations given here and the computer program Maple 12, abundant exact explicit special solutions to the Sharma-Tasso-Olver equation are constructed. In addition to all known solutions re-deriving in a systematic way, several entirely new and more general exact explicit solitary wave solutions can also be obtained. These solutions include (a) the algebraic solitary wave solution of rational function, (b) single-soliton solutions, (c) double-soliton solutions, (d) N-soliton solutions, (e) singular traveling solutions, (f) the periodic wave solutions of trigonometric function type, and (g) many non-traveling solutions. By using the Airy’s function and the Bäcklund transformations obtained here, the exact explicit solution of the initial value problem for the STO equation is presented. The variety of the structure of the solutions for the Sharma-Tasso-Olver equation is illustrated.     

LC–APCI–MS Quantitative Analysis of Curcumin in Rabbit Plasma

A simple and specific liquid chromatography–atmospheric pressure chemical ionization–mass spectrometry (LC–APCI–MS) method was developed and validated for quantitative analysis of curcumin in rabbit plasma. Chromatographic separation was carried out on Zorbax SB-C18 column, acetonitrile-methanol–water used as mobile phase with gradient elution. APCI source was applied and operated in negative ion mode, and selective ion monitoring mode used to quantify curcumin. The method showed excellent intra-assay and inter-assay precision (relative standard deviations and bias <15%) for quality control (QC) samples. This method was successfully applied to a pharmacokinetic study of curcumin after intravenous administration to rabbits.     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A facile pathway for the fast synthesis of colloidal crystal‐loaded hydrogels via frontal polymerization

In this work, a dually sensitive colloidal crystal (CC)‐loaded hydrogel has been synthesized via frontal polymerization (FP) in a facile and rapid way. First, a polystyrene CC film was fabricated by vertical deposition on the inner wall of a test tube. Then, a mixture of acrylic acid (AAc), 2‐hydroxyethyl methacrylate (HEMA), and glycerol along with the initiator and crosslinker was added to this test tube to carry out FP, resulting in the formation of CC‐loaded hydrogel. The influence of the mass ratios of HEMA/AAc on front velocity and temperatures were studied. The swelling behavior, the morphology, and the stimuli‐responsive behavior of the CC‐loaded hydrogels prepared via FP were thoroughly investigated on the basis of swelling measurement, scanning electron microscopy, and reflection spectra. Results show that the as‐prepared CC‐loaded hydrogels exhibit excellent dual sensitivity to both methanol concentrations and pH values with very short response time, which can be observed visually without the aid of instruments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic alternating copolymerization of epoxide and six‐membered lactone bearing naphthyl moiety

This article describes the anionic copolymerization of glycidyl phenyl ether (GPE) and 1,2‐dihydro‐3H‐naphtho[2,1‐b]pyran‐3‐one (DHNP), a six‐membered aromatic lactone bearing naphthyl moiety. The copolymerization proceeded in a 1:1 alternating manner, to afford the corresponding polyester. The ester linkage in the main chain was cleavable by reduction with lithium aluminum hydride to give the corresponding diol that inherited the structure of the alternating sequence. The copolymerization ability of DHNP permitted its addition as a comonomer to an imidazole‐initiated polymerization of bisphenol A diglycidyl ether. The resulting networked polymer, of which main chain was endowed with the DHNP‐derived rigid naphthalene moieties, showed a higher glass transition temperature than that obtained similarly with using 3,4‐dihydrocoumarin (DHCM) as a comonomer, an analogous aromatic lactone bearing phenylene moiety instead of naphthalene moiety of DHNP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

无机化学实验室危险废物减量化

高校化学实验室每年要产生大量危险废物,对学校及周边环境造成了严重危害.该文就消除和/或减少废物的产生以及废旧材料的再利用、回收或循环等方面介绍高校无机化学实验室危险废物减量化的成果与进展.